How to finish a beading loom project without cutting off its strings

(Please click here to be redirected to our YouTube channel)

 

Materials and tools necessary to make the beaded part:

1. I used the Giant Peak Dale loom. This loom measures 300mm by 150mm (will take up to 86 warp threads)
2. Nymo thread size D – colour white
3. Miyuki Delica beads – colours: brown, blue, red, orange and gold.
4. Scissors
5. Beading needle
6. Masking tape
7. Cement glue

Instructions:

Please note this technique can be used on even or odd strand counts. You can only use this technique if you have used the same continuous thread in your entire project. It will be impossible to pull the thread through if you make any amend/ knot or add thread to the project. That’s why this technique is recommended for smaller bead loom projects, because usually bigger ones need additional thread so please be aware of that. Here is the link for our YouTube video, click here.

Watch this and other tutorials on our Youtube channel (www.YouTube.com/angablue).

I hope I have succeeded in teaching you this craft. Please follow Angablue on YouTube, Instagram, Twitter and Facebook.

Thanks for passing by!

©2001-2020 Angablue.com/EF. All Rights Reserved